How To Install Vinyl Stickers Using The Wet Method

How To Install Vinyl Stickers Using The Wet Method

Large Vinyl Decal Stickers are becoming popular marketing methods. Businesses everywhere are using them to promote their products and services. However, these decals can be difficult to apply, especially on glass or other flat surfaces.

The traditional method uses a dry application, which can often result in wrinkles or air bubbles. This can be time-consuming and even costly if you need to hire a professional to do it for you. An alternate method known as the wet application can make applying Large Vinyl Decal Stickers much easier.

By using water to wet the surface before applying the decal, you can avoid many common problems associated with dry applications. In addition, the water will help to keep the decal in place while you smooth out any wrinkles or air bubbles. This method is not only easier, but it can also save you time and money.

To make this method as easy as a pro, you will need the following supplies:

If you’re looking for a professional-looking application, you’ll need the following supplies:

  • Dry Towel

  • Cleaning alcohol

  • A water sprayer with glass cleaner or water

  • Credit card or similar thin hard object.

 

How To Install Vinyl Stickers Using The Wet Method

With these items on hand, you’ll be well on your way to creating a beautiful and professional-looking decal application.

So let’s go ahead and get started.

Step 1: Clean The Surface Where The Decals Will Be Applied

Before applying any decals, it is important to clean the surface where they will be placed. This will help ensure that the decals adhere properly and do not leave residue behind.

Transparent decals are easier to manipulate than those made from paper, as they are made from clear plastic. To clean the surface, spray with alcohol and then wipe with a cloth. You can also use soapy water, but be aware that it may leave behind streaks.

Alcohol will evaporate much faster and is, therefore, a better option. Once the surface is clean, you can move to the next step.

How To Install Vinyl Stickers Using The Wet Method

Step 2: Spray water evenly on the surface to be decals

This is the most important step of this method and is very simple. You must spray water evenly over the surface to which you will stick the tape.

Note, when doing this step, you must avoid letting dust particles fly into the sprayed water. The dust will cause bubbles when you apply the tape, ruining the smooth surface.

Also, ensure that you use clean water; otherwise, the dirt and impurities in the water will also cause bubbles. Once you have sprayed the water evenly, please wait a few seconds for it to evaporate; then, apply the tape quickly before it has a chance to evaporate or run completely.

You will see the designs begin to separate and come to the surface. Using your fingertips or a pair of tweezers, gently lift each decal and position them on your nail. You can cut the designs down to smaller sizes if you want. When you are satisfied with the placement of the decals, move on to the next step.

 

How To Install Vinyl Stickers Using The Wet Method

Step 3: Use A Credit Card To Wipe All The Water Off The Decals

Use a credit card or similar object to swipe in order from the inside out. Swipe gently and evenly to ensure that the water from the underside of the decals flows out along the edges, pulling air bubbles.

Don’t worry about the adhesive losing its adhesion; vinyl decals are made for this method. After running out of water for a few hours, it will stick very tightly to the surface.

And don’t feel super rushed cause if you feel like it’s drying out, you can lift it and spray it again.

 

How To Install Vinyl Stickers Using The Wet Method

Step 4: Use A Dry Towel To Push All The Tiny Air Bubbles Out Of The Decal

Keep pressing it until it sticks, and no more moisture comes out.

You need to hold a dry towel and gently wipe it on the surface of the decals.

The result is amazing, and your decals will be glued very tightly on the car door, glass door or any other position you want as intended and without any air bubbles.

It’s easy.

You can refer to this video

 

Above is a simple wet method to apply transparent vinyl decals. Please let us know if you have a better, more effective method.

Thank you

Leave a Reply

Your email address will not be published. Required fields are marked *

×
×